EN Series Hex Bar and Rod Export in South Africa

Creative Piping Solutions Private Limited is a recognized manufacturer and dealer of EN Series CS Hex Bars, which is the low carbon version of the alloy. EN Series Carbon Steel Hexagonal Bars has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing Sulphur gases are not present. With its high chromium content, EN Series Carbon Steel Hexagon Bars offers good corrosion resistance to increase high temperature properties. We are one of the prominent Stockists and Exporters of superior range of EN1A, EN8, EN9, EN19, EN24, EN32B, EN45, EN47, EN353, EN18, EN31 Rods.

Stainless Steel Hex Bar and Rod Export in South Africa

SS Hex Bar is known for its excellent galling resistance, even at elevated temperatures, where chips will be tough and stringy, therefore chip curlers and breakers are important. These Stainless Steel Hexagonal Bars maintains decent strength up to temperatures of 1800 Degree F and has oxidation resistance similar to that of other steels. The general corrosion resistance of our Stainless Steel Hexagon Bars is between that of stainless steel and other alloys.

Specifications: ASTM A276, ASME SA276 / ASTM A479 ASME SA479.
Grades: SS 303, 304, 304H, 304L, 310, 310S, 316, 316L, 316H, 316Ti, 317, 317L, 321, 321H, 347, 410, 416, 420, 430, 430F, 446, 422, 431, 904L, 440C.

Carbon Steel Hex Bar and Rod Export in South Africa

CS Hex Bars contain a small amount of incidental elements left over from steelmaking. We also offer the same in different grades and specifications To change the properties of Carbon Steel Hexagonal Bars is by adding alloying elements other than carbon that produce characteristics not achievable in plain carbon steel. Each of the approximately 20 elements used for Carbon Steel Hexagon Bars has a distinct influence on microstructure and on the temperature, holding time, and cooling rates at which microstructures change.

Specifications: ASTM A105, ASME SA105, ASTM A350 LF2.
Grades: CS 1008, 1010, 1015, C35, C30, ST 52.3, 1541, 1140, 1035, 1030.

Alloy Steel Hex Bar and Rod Export in South Africa

Alloy Steel Hex Bars are extensively used in various industrial applications. We are one of the most quality conscious producers of the wide range of Alloy Steel Hexagonal Bars which is meant to cater to various industrial platforms in various domains. Our organization is extensively recognized as one of the authentic and leading manufacturers, stockists, suppliers and exporters of quality – approved Alloy Steel Hexagon Bars, which are manufactured by the optimum utilization of sourced raw material and modern machinery at the most sophisticated production unit.

Specifications: ASTM A182, ASME SA182, ASTM A350.
Grades: F1, F2, F5, F9, F11, F22, F91, LF2, LF3.

Inconel Hex Bar and Rod Export in South Africa

Inconel Alloy Hex Bars are oxidation resistant to 1800 Degree F in open air. We offer these products in dissimilar grades such as Inconel Hexagonal Bars, Inconel Rods. Our Inconel Hexagon Bars is known as the most universally corrosion resistant material available today, which further resists the formation of grain boundary precipitates that would degrade corrosion resistance.

Specifications: ASTM B166, ASME SB 166.
Grades: Inconel 601, 625, 600, 718, X750, 800/800H/800HT, 825, 925, 330/SS330/RA330.

Monel Hex Bar and Rod Export in South Africa

Monel Alloy Hex Bars are being an extremely useful product in engineering industries, and over this range is extensively required by the clienteles. However, this Monel Hexagonal Bars are engineered and designed by using best quality of Monel in observance by means of the international quality norms and standards. Monel Hexagon Bars has some outstanding features to offer such as resistant to corrosion, free from any type of maintenance, precise dimensions, and more. Our firm focuses in supplying, trading a qualitative variety of these Monel Hexagonal Bars and Rods.

Specifications: ASTM B164 / ASME SB 164.
Grades: Monel 400, K500.

Hastelloy Hex Bar and Rod Export in South Africa

Hastelloy Alloy Hex Bars are made by our specialists who make use of quality – sanctioned material in the industrial process. We also offer these Hastelloy Hexagonal Bars at best possible rates. Our Hastelloy Hexagon Bars as well has some of the finest features to provide such as high tensile potency, sturdy construction, precise dimensions, and so on. Fulfilling with the customer specific necessities, these Hastelloy Hexagonal Bars and Rods are obtainable in host of provisions at market leading price.

Specifications: ASTM B574 / ASME SB 574.
Grades: Hastelloy C22, C276, B2, B3, X.

Nickel Hex Bar and Rod Export in South Africa

Nickel Alloy Hex Bars manufactured in an extensive range. However, trained and highly experienced professionals are hired by us to make the offered collection of these Nickel Hexagonal Bars. These Nickel Hexagon Bars has some outstanding features to offer such as tough construction, dimensionally accurate, lightweight, and so on. To rule out every prospect of defect, we check these Nickel Hexagonal Bars and Rods on certain restrictions of quality. These Bars are being mass – produced bearing in mind the different needs of our well – regarded clienteles.

Specifications: ASTM B160 / ASME SB 160.
Grades: Nickel 200, 201.

AISI / SAE Hex Bar and Rod Export in South Africa

We are PED approved and having 29+ years of experience in the field of supplying and exporting AISI / SAE Hexagonal Bars and Rods. We produce Hexagon Bars & Rods in AISI/SAE 52100, AISI/SAE 8630, AISI/SAE 4130, Nitinol, Nimonic 75, Nimonic 80A, Nimonic 90, Nimonic 263, Haynes 25, Haynes 188, Cobalt 6B, Invar 36, Invar 42, SSC-6MO / AL-6XN, Fermonic 50, Custom- 50, Custom 455, Nilo Alloy 48, Nilo Alloy K, Nilomag Alloy 77, Nitronic 30, Nitronic 40, Nitronic 60, Nitronic 50, 15-5 PH, 13-8 MO, 15-7 MO, 17-4 PH, 17-7 PH, Alloy 20, 254 SMO

Duplex Hex Bar and Rod Export in South Africa

Duplex and Super Duplex Stainless Steel Hex Bar is being made under the leadership of our accomplished specialists who make sure to use improved techniques and latest machines in the manufacturing procedure. Made in consistency by means of the generally defined quality norms and standards, our supplied Duplex Steel Square Bars are ensured for their unified finish and design. We as well offer these products in different grades such as Duplex S31803/S32205, Super Duplex S32750/S32760, S32950, Zeron 100 Hexagonal Bars and Rods.

Specifications: ASTM A276 / ASME SA 276.
Grades: Duplex S31803/S32205, Super Duplex S32750/S32760, S32950, Zeron 100.

Titanium Hex Bar and Rod Export in South Africa

Titanium Hex Bars is the most generally used and extensively obtainable grade of unalloyed titanium. These Titanium Hexagonal Bars is characteristically used in applications that need higher corrosion resistance in different hostile media. Titanium Hexagon Bars as well offers superior strength and formability between 1 and 3.

Specifications: ASTM B348 / ASME SB 348.
Grades: Titanium Grade 2, Grade 5, Grade 7.

Alloy 20 Hex Bar and Rod Export in South Africa

ASTM B473 / ASME SB 473 Alloy 20 Hex Bars are hard – wearing in nature and have widespread applications. These Alloy 20 Hexagonal Bars has outstanding resistance to corrosion, pitting and crevice corrosion. Specially designed to endure sulfuric acid, our Alloy 20 Hexagon Bars offers outstanding corrosion resistance. These Bars and Rods are chromium – nickel – molybdenum alloy that was industrialized for applications comprising acid attack, precisely sulfuric acid.

254 SMO Hex Bar and Rod Export in South Africa

254 SMO Hex Bar is well – tested on varied parameters thereby ensuring its high quality and durable standards. SMO 254 Hexagonal Bars is often used in Flue – gas cleaning, Desalination, Heat exchangers, and more. SMO 254 Hexagon Bars is an austenitic stainless steel by means of soaring molybdenum content. SMO 254 Hexagonal Bars and Rods are exceptionally high end, nitrogen and molybdenum alloyed super austenitic alloy by means of low carbon content.

Specifications: ASTM A479 / ASTM SA 479 / ASTM A276 / ASTM SA 276.