{"id":5240,"date":"2020-07-20T07:56:17","date_gmt":"2020-07-20T07:56:17","guid":{"rendered":"http:\/\/siddhigiri.com\/?page_id=5240"},"modified":"2020-08-28T13:12:50","modified_gmt":"2020-08-28T13:12:50","slug":"en8-round-bar-manufacturers","status":"publish","type":"page","link":"https:\/\/www.creativeforged.com\/bars\/en8-round-bar-manufacturers\/","title":{"rendered":"EN8 Round Bars \/ EN8D Rods"},"content":{"rendered":"
\n

EN8 Round Bar Manufacturers, EN8 Rod Suppliers<\/h1>\n
\n <\/p>\n
    \n
  1. <\/li>\n
  2. <\/li>\n
  3. <\/li>\n<\/ol>\n

    <\/p>\n

    \n
    \"EN8<\/p>\n
    \n

    EN8 Round Bar<\/p>\n<\/p><\/div>\n<\/p><\/div>\n

    \"EN8<\/p>\n
    \n

    EN8 Rod<\/p>\n<\/p><\/div>\n<\/p><\/div>\n

    \"En8d<\/p>\n
    \n

    En8d Carbon Steel Round Bar<\/p>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/p><\/div>\n

    Most Reliable Stockists, Suppliers & Exporters of En8 Bright Bar, En8 Round Bar, En8 Flat Bar, En8 Hexagon Bar, En8 Square Bar, En8 Steel Flat Bar, En8 Rectangular Bar in Mumbai, Pune, Chennai, India, Indonesia, Singapore, Houston, USA, Canada, UK, Australia, UAE, and South Africa.<\/h2>\n
    \n
    \n

    <\/span>EN8 Bars Specifications<\/a><\/p>\n

    <\/span>EN8 Bars Equivalent Grades<\/a><\/p>\n

    <\/span>EN8 Bars Chemical Composition<\/a><\/p>\n

    <\/span>EN8 Bars Mechanical Properties<\/a><\/p>\n

    <\/span>EN8 Bars Available Shapes\/Types<\/a><\/p>\n<\/p><\/div>\n

    \n

    <\/span>EN8 Bars Sizes Charts<\/a><\/p>\n

    <\/span>EN8 Bars Surface Finish<\/a><\/p>\n

    <\/span>EN8 Bars Condition<\/a><\/p>\n

    <\/span>Why Choose Creative Piping Solutions Private Limited?<\/a><\/p>\n

    <\/span>EN8 Bars Applications<\/a><\/p>\n

    <\/span>Countries We Supply & Export<\/a><\/p>\n<\/p><\/div>\n<\/p><\/div>\n

    Buy En8 Rod, En8 Steel Bar, En8 Hex Bar, En8 Mild Steel Bar, En8 Engineering Steel Rod, Carbon Steel En 8 Bright Bar, En8 Black Bar, En8 Forged Bar, En8 Ground Bar, En8 Hollow Bar in all Sizes at Market Leading Prices.<\/h3>\n
    \n

    En8 \/ EN8D Bars & Rods<\/h4>\n

    EN8 Round Bar and Rod<\/strong> is a medium carbon steel round bar that offers greater strength and hardness as compared to the low carbon grades. Formability and weldability of EN 8 \/ 8D is fair when using accepted shop practices. While machinability is good, this grade responds very well to forging and heat treating. Standard Sizes of EN8 Bars for Rounds from 23.5 mm to 300 mm, Bright Bars from 18 mm to 63.5 mm, Flats from 50 mm x 8mm to 150mm x 25mm, Squares from 22 mm to 75 mm, RCS: 55mm, 63 mm, and 75 mm, Hexagons from 23.5 mm to 38 mm.<\/p>\n

    Creative Piping Solutions Private Limited<\/strong> is manufacturing, stocking, and supplying a wide range of round bars and rods as per the requirements of clients. We product best quality Carbon Steel Bright Bars and Rods in varied shapes and sizes so that we can fulfil all the needs and desires of industries. We manufacture our EN 8 Hex and Flat Bars keeping in mind the quality parameters and requirement set by the industry. These Square Bars are known best for their excellent features and quality.<\/p>\n

    EN8 Engineering Steel<\/strong>, also know as 080M40<\/strong>, is an unalloyed medium carbon steel. EN8 is a medium strength steel with good tensile strength. Typical Applications of EN8D Bars & Rods<\/strong> Automotive parts, Connecting rods, Studs, bolts, Axles, spindles, General engineering components. That said EN8 \/ EN8D Steel Round Bars are always supplied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per your needs and demands.<\/p>\n<\/p><\/div>\n

    <\/a><\/p>\n

    EN 8 \/ EN8D Round Bar Specifications<\/h4>\n
    \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Grade<\/th>\nEN8D \/ EN-8<\/td>\n<\/tr>\n
    Specification<\/th>\nBS970: 1955 EN8, BS970\/PD970: 1970 onwards 080M40.<\/td>\n<\/tr>\n
    Round Bar Size<\/th>\nDiameter: 3-~800mm<\/td>\n<\/tr>\n
    Square Bar size<\/th>\n4 to 100mm<\/td>\n<\/tr>\n
    Flat Bar Size<\/th>\nThickness: 2 -100mm<\/td>\n<\/tr>\n
    Width: 10 to 500mm<\/td>\n<\/tr>\n
    Hex\u00a0Bar Size<\/th>\n2-100mm A\/F<\/td>\n<\/tr>\n
    Rectangles Size<\/th>\n33 x 30mm to 295 x 1066mm<\/td>\n<\/tr>\n
    Hollow Bar<\/th>\n32mm OD x 16mm ID to 250mm OD x 200mm ID)<\/td>\n<\/tr>\n
    Angle Bar Size<\/th>\n3mm*20mm*20mm~12mm*100mm*100mm<\/td>\n<\/tr>\n
    Channel Bar<\/th>\n80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness<\/td>\n<\/tr>\n
    Section<\/th>\n3.0 to 12.0mm thickness<\/td>\n<\/tr>\n
    Billet Size<\/th>\n1\/2\u2033 to 495mm Diameter<\/td>\n<\/tr>\n
    Finish<\/th>\nCold (bright) drawn, centreless ground,smooth turned, Rough Turned, Bright, peeled, hot rolled,
    \n hot rolled annealed, slit rolled edge, Polish, Grinding, Centreless Ground & Black<\/td>\n<\/tr>\n
    Tolerance<\/th>\nK9, K10, K11, K12, H8, H9, H10, H11, H12, H13, or as per clients\u2019 requirements<\/td>\n<\/tr>\n
    Surface<\/th>\nPolished, Bright, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Hairline<\/td>\n<\/tr>\n
    Condition<\/th>\nHardened & Tempered, Annealed<\/td>\n<\/tr>\n
    Technique<\/th>\nen8 Hot Rolled, Cold Rolled, Cold Drawn, Forged Round Bar, Rods<\/td>\n<\/tr>\n
    Processing<\/th>\nBar cutting to 650mm<\/td>\n<\/tr>\n
    Form<\/th>\nen8 Welding Rod, Round, Round Rod, Rings, Hollow, Rod, T-Bar, Channel Bar, Flat Bar, Square, Blocks, Precision Ground Bar,
    \n Triangle, Rectangle, Hex (A\/F), Threaded, Ingot, I\/H Bar, Half Round Bar, Profiles, Billet, Forging etc.<\/td>\n<\/tr>\n
    EN8 \/ EN8D Bars and Rods Conforms To NACE MR0175\/ISO 15156<\/th>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n
    <\/a><\/p>\n

    EN 8 \/ EN8D Equivalent Grades<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n
    BRITISH BS 970:1991<\/td>\n080A42<\/td>\n<\/tr>\n
    BRITISH BS 970:1955<\/td>\nEN8D<\/td>\n<\/tr>\n
    GERMAN DIN<\/td>\nCK40<\/td>\n<\/tr>\n
    FRENCH AFNOR<\/td>\nXC42<\/td>\n<\/tr>\n
    SWEDISH SS<\/td>\n1650<\/td>\n<\/tr>\n
    AMERICAN SAE<\/td>\n1040<\/td>\n<\/tr>\n
    EUROPEAN STEEL NO.<\/td>\n1.1186<\/td>\n<\/tr>\n
    EUROPEAN STEEL NAME<\/td>\nC40E<\/td>\n<\/tr>\n
    EUROPEAN STANDARD<\/td>\nEN10277-2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n\n\n
    EN8 Equivalents<\/th>\n<\/tr>\n<\/thead>\n
    BS970: 1955<\/td>\nEN8<\/td>\n<\/tr>\n
    BS970\/PD970:1970 onwards<\/td>\n080M40<\/td>\n<\/tr>\n
    European<\/td>\nC40, C45, Ck40,Ck45, Cm40, Cm45<\/td>\n<\/tr>\n
    Werkstoff No.<\/td>\n1.0511, 1.1186, 1.1189<\/td>\n<\/tr>\n
    US SAE (AISI)<\/td>\n1039, 1040, 1042, 1043, 1045<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    <\/a><\/p>\n

    En8 Round Bar Chemical Composition<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n\n
    080M40 (EN8)<\/th>\n<\/tr>\n<\/thead>\n
    Carbon<\/td>\n0.36-0.44%<\/td>\n<\/tr>\n
    Silicon<\/td>\n0.10-0.40%<\/td>\n<\/tr>\n
    Manganese<\/td>\n0.60-1.00%<\/td>\n<\/tr>\n
    Sulphur<\/td>\n0.050 Max<\/td>\n<\/tr>\n
    Phosphorus<\/td>\n0.050 Max<\/td>\n<\/tr>\n
    Chromium<\/td>\n\u2013<\/td>\n<\/tr>\n
    Molybdenum<\/td>\n\u2013<\/td>\n<\/tr>\n
    Nickel<\/td>\n\u2013<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    <\/a><\/p>\n

    En8 Round Rods & Bars Mechanical Properties<\/h4>\n\n\n\n\n\n\n\n\n\n\n
    080M40 (EN8) \u2013 mechanical properties in “R” condition<\/th>\n<\/tr>\n
    Max Stress<\/td>\n700-850 n\/mm2<\/td>\n<\/td>\n<\/tr>\n
    0.2% Proof Stress<\/td>\n450 n\/mm2\u00a0Min<\/td>\n(up to 19mm LRS)<\/td>\n<\/tr>\n
    Yield Stress<\/td>\n465 n\/mm2\u00a0Min<\/td>\n(up to 19mm LRS)<\/td>\n<\/tr>\n
    Elongation<\/td>\n16% Min<\/td>\n(12% if cold drawn)<\/td>\n<\/tr>\n
    Impact KCV<\/td>\n28 Joules Min<\/td>\n(up to 19mm LRS<\/td>\n<\/tr>\n
    Hardness<\/td>\n201-255 Brinell<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    <\/a><\/p>\n

    En8 Steel Bar & Rod Available Shapes \/ Types<\/h4>\n\n\n\n\n\n\n
    EN-8 \/ EN8D Polished Round Bar<\/td>\nEN-8 \/ EN8D T-Bar<\/td>\nEN-8 \/ EN8D Square Bar<\/td>\n<\/tr>\n
    EN-8 \/ EN8D Triangle Bar<\/td>\nEN-8 \/ EN8D Flat Bar<\/td>\nEN-8 \/ EN8D Hex Bar<\/td>\n<\/tr>\n
    EN-8 \/ EN8D Precistion Stock Bar<\/td>\nEN-8 \/ EN8D Hollow Bar<\/td>\nEN-8 \/ EN8D Round Bar<\/td>\n<\/tr>\n
    EN-8 \/ EN8D Threaded Bar<\/td>\nEN-8 \/ EN8D Rods<\/td>\nEN-8 \/ EN8D Half Round Bar<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    <\/a><\/p>\n

    EN8 \/ EN8D Sizes Charts<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n
    En8 Mild Steel Rounds Bright Drawn \/ Turned<\/th>\n<\/tr>\n<\/thead>\n
    Size (inches)<\/td>\n1\/4<\/td>\n5\/16<\/td>\n3\/8<\/td>\n7\/16<\/td>\n1\/2<\/td>\n1<\/td>\n5\/8<\/td>\n11\/16<\/td>\n3\/4<\/td>\n1<\/td>\n7\/8<\/td>\n1<\/td>\n1<\/td>\n1 1\/8<\/td>\n<\/tr>\n
    1 1\/4<\/td>\n1 3\/8<\/td>\n1 7\/16<\/td>\n1 1\/2<\/td>\n1 5\/8<\/td>\n1 3\/4<\/td>\n1 7\/8<\/td>\n2<\/td>\n2 1\/8<\/td>\n2 1\/4<\/td>\n2 3\/8<\/td>\n2 1\/2<\/td>\n2 5\/8<\/td>\n2 3\/4<\/td>\n<\/tr>\n
    3<\/td>\n3 1\/4<\/td>\n3 1\/2<\/td>\n3 3\/4<\/td>\n4<\/td>\n4 1\/4<\/td>\n4 1\/2<\/td>\n4 3\/4<\/td>\n5<\/td>\n5 1\/4<\/td>\n5 1\/2<\/td>\n6<\/td>\n6 1\/2<\/td>\n7<\/td>\n<\/tr>\n
    7 1\/2<\/td>\n8<\/td>\n9<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
    Size (mm)<\/td>\n5<\/td>\n6<\/td>\n7<\/td>\n8<\/td>\n9<\/td>\n10<\/td>\n12<\/td>\n13<\/td>\n14<\/td>\n15<\/td>\n16<\/td>\n18<\/td>\n20<\/td>\n22<\/td>\n<\/tr>\n
    24<\/td>\n25<\/td>\n28<\/td>\n30<\/td>\n32<\/td>\n35<\/td>\n36<\/td>\n38<\/td>\n40<\/td>\n42<\/td>\n45<\/td>\n50<\/td>\n55<\/td>\n60<\/td>\n<\/tr>\n
    65<\/td>\n70<\/td>\n75<\/td>\n80<\/td>\n85<\/td>\n90<\/td>\n95<\/td>\n100<\/td>\n110<\/td>\n120<\/td>\n125<\/td>\n130<\/td>\n140<\/td>\n150<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    \n\n\n\n\n\n\n\n
    En8 Mild Steel Rounds Hot Rolled<\/th>\n<\/tr>\n<\/thead>\n
    Size (mm)<\/td>\n45<\/td>\n50<\/td>\n55<\/td>\n60<\/td>\n65<\/td>\n70<\/td>\n75<\/td>\n80<\/td>\n85<\/td>\n90<\/td>\n95<\/td>\n100<\/td>\n105<\/td>\n110<\/td>\n<\/tr>\n
    115<\/td>\n120<\/td>\n125<\/td>\n130<\/td>\n135<\/td>\n140<\/td>\n145<\/td>\n150<\/td>\n155<\/td>\n160<\/td>\n165<\/td>\n170<\/td>\n180<\/td>\n185<\/td>\n<\/tr>\n
    190<\/td>\n200<\/td>\n210<\/td>\n220<\/td>\n230<\/td>\n240<\/td>\n250<\/td>\n260<\/td>\n270<\/td>\n280<\/td>\n300<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    \n\n\n\n\n\n
    En8 Hexagons Bright Drawn<\/th>\n<\/tr>\n<\/thead>\n
    Size (ins A\/F)<\/td>\n1.062<\/td>\n1.125<\/td>\n1.200<\/td>\n1.300<\/td>\n1.480<\/td>\n1.500<\/td>\n2.000<\/td>\n2.048<\/td>\n2.220<\/td>\n2.410<\/td>\n2.580<\/td>\n2.760<\/td>\n3.150<\/td>\n3.550<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    \n\n\n\n\n\n\n\n\n\n\n\n\n
    En8 Mild Steel Flats Bright<\/th>\n<\/tr>\n<\/thead>\n
    Size (ins. A\/F)<\/td>\n1 x 1\/2<\/td>\n2 x 1\/4<\/td>\n3 x 1\/2<\/td>\n4 x 1\/2<\/td>\n5 x 1\/2<\/td>\n6 x 3\/4<\/td>\n<\/tr>\n
    –<\/td>\n2 x 3\/8<\/td>\n3 x 3\/4<\/td>\n4 x 1<\/td>\n–<\/td>\n6 x 1<\/td>\n<\/tr>\n
    1 1\/2 x 3\/8<\/td>\n2 x 3\/4<\/td>\n3 x 1<\/td>\n4 x 1 1\/2<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
    1 1\/2 x 1\/2<\/td>\n2 x 1<\/td>\n–<\/td>\n4 x 2<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
    1 1\/2 x 5\/8<\/td>\n–<\/td>\n3 1\/2 x 1<\/td>\n4 x 2 1\/2<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
    1 1\/2 x 3\/4<\/td>\n2 1\/2 x 3\/8<\/td>\n3 1\/2 x 1 1\/2<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
    1 1\/2 x 1<\/td>\n2 1\/2 x 1<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n
    –<\/td>\n2 1\/2 x 3\/4<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n–<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    <\/a><\/p>\n

    En8 \/ En8d Round Bars Surface Finish<\/h4>\n\n\n\n\n\n\n\n\n
    CD<\/th>\nCold drawn<\/td>\nP<\/th>\nPolished<\/td>\n<\/tr>\n
    BD<\/th>\nBright drawn<\/td>\nSRE<\/th>\nSlit rolled edge<\/td>\n<\/tr>\n
    CG<\/th>\nCentreless ground<\/td>\nHF<\/th>\nHot finished<\/td>\n<\/tr>\n
    CF<\/th>\nCold finished<\/td>\nHRAP<\/th>\nHot rolled annealed and pickled<\/td>\n<\/tr>\n
    P&T<\/th>\nPeeled and turned<\/td>\nRT<\/th>\nRough turned\/peeled<\/td>\n<\/tr>\n
    ST<\/th>\nSmooth turned<\/td>\nPR<\/th>\nPeeled and reeled<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    <\/a><\/p>\n

    En8d Rods & Bars Condition<\/h4>\n\n\n\n\n\n
    H&T<\/th>\nHardened and tempered.<\/td>\n<\/tr>\n
    ANN<\/th>\nAnnealed<\/td>\n<\/tr>\n
    PH<\/th>\nPrecipitation hardened.<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n
    <\/a><\/p>\n

    Why Choose Us To Buy En8 Bars & Rods?<\/h4>\n